Scanning Network With Nmap Advanced

Scanning Network with Nmap Advanced Techniques

When to Use

• Performing comprehensive asset discovery across large enterprise networks during authorized assessments
• Enumerating service versions and configurations to identify outdated or vulnerable software
• Bypassing firewall rules and IDS during authorized penetration tests using scan evasion techniques
• Scripting automated vulnerability checks using the Nmap Scripting Engine (NSE)
• Generating structured scan output for integration into vulnerability management pipelines

Do not use against networks without explicit written authorization, on production systems during peak hours without approval, or to perform denial-of-service through aggressive scan timing.

Most Often Missed & How to Confirm

• UDP is the silent gap: a TCP-only scan misses SNMP (161), DNS (53), TFTP (69), IKE (500), NTP (123). Run nmap -sU --top-ports 200 (slow, but those services are often the foothold); skipping UDP is the most common under-report.
• Full port range, not top-1000: services hide on high ports — use -p- before declaring a host "has only 3 ports." Default scans cover 1000 of 65535.
• Probes blocked ≠ host down: if ICMP is filtered, -sn marks live hosts as down. Add TCP/UDP discovery probes (-PS21,22,80,443,445 -PU53,161) or scan with -Pn; never conclude "no hosts" from ICMP alone.
• Firewall/IDS evasion variants: when a straight -sS is filtered, try fragmentation (-f/--mtu), decoys (-D RND:10), source-port spoofing (--source-port 53), and slow timing (-T1 --scan-delay) to evade rate-based IDS — a filtered result may be the IDS, not a closed port.
• NSE depth: -sV -sC gives version + safe scripts, but vuln confirmation needs --script vuln and targeted scripts (smb-vuln-ms17-010, ssl-heartbleed). A clean default scan is not a clean vuln assessment.
• How to confirm a hit: a real open port returns SYN-ACK (-sS) or a service banner under -sV; open|filtered (common on UDP) is unconfirmed — re-probe with --version-intensity or an app-specific NSE script before reporting it open or closed.
• Don't conclude "host clean" until you've covered TCP -p-, top UDP, version+NSE vuln scripts, and retried filtered ports through an evasion technique.

Prerequisites

• Nmap 7.90+ installed (nmap --version to verify)
• Root/sudo privileges for SYN scans, OS detection, and raw packet techniques
• Written authorization specifying in-scope IP ranges and any excluded hosts
• Network access to target ranges (VPN, direct connection, or jump host)
• Familiarity with TCP/IP protocols and common port assignments

Workflow

Step 1: Host Discovery with Multiple Probes

Use layered discovery to find live hosts even when ICMP is blocked:

# ARP discovery for local subnet (most reliable on LAN)
nmap -sn -PR 192.168.1.0/24 -oA discovery_arp

# Combined ICMP + TCP + UDP probes for remote networks
nmap -sn -PE -PP -PS21,22,25,80,443,445,3389,8080 -PU53,161,500 10.0.0.0/16 -oA discovery_combined

# List scan to resolve DNS names without sending packets to targets
nmap -sL 10.0.0.0/24 -oN dns_resolution.txt

Consolidate results into a live hosts file:

grep "Host:" discovery_combined.gnmap | awk '{print $2}' | sort -t. -k1,1n -k2,2n -k3,3n -k4,4n > live_hosts.txt

Step 2: Port Scanning with Timing and Performance Tuning

# Full TCP SYN scan with optimized timing
nmap -sS -p- --min-rate 5000 --max-retries 2 -T4 -iL live_hosts.txt -oA full_tcp_scan

# Top 1000 UDP ports with version detection
nmap -sU --top-ports 1000 --version-intensity 0 -T4 -iL live_hosts.txt -oA udp_scan

# Specific port ranges for targeted assessment
nmap -sS -p 1-1024,3306,5432,6379,8080-8090,9200,27017 -iL live_hosts.txt -oA targeted_ports

Step 3: Service Version Detection and OS Fingerprinting

# Aggressive service detection with version intensity
nmap -sV --version-intensity 5 -sC -O --osscan-guess -p <open_ports> -iL live_hosts.txt -oA service_enum

# Specific service probing for ambiguous ports
nmap -sV --version-all -p 8443 --script ssl-cert,http-title,http-server-header <target> -oN service_detail.txt

Step 4: NSE Vulnerability Scanning

# Run vulnerability detection scripts
nmap --script vuln -p <open_ports> -iL live_hosts.txt -oA vuln_scan

# Target specific vulnerabilities
nmap --script smb-vuln-ms17-010,smb-vuln-ms08-067 -p 445 -iL live_hosts.txt -oA smb_vulns
nmap --script ssl-heartbleed,ssl-poodle,ssl-ccs-injection -p 443,8443 -iL live_hosts.txt -oA ssl_vulns

# Brute force default credentials on discovered services
nmap --script http-default-accounts,ftp-anon,ssh-auth-methods -p 21,22,80,8080 -iL live_hosts.txt -oA default_creds

Step 5: Firewall Evasion Techniques

# Fragment packets to evade simple packet inspection
nmap -sS -f --mtu 24 -p 80,443 <target> -oN fragmented_scan.txt

# Use decoy addresses to obscure scan origin
nmap -sS -D RND:10 -p 80,443 <target> -oN decoy_scan.txt

# Spoof source port as DNS (53) to bypass poorly configured firewalls
nmap -sS --source-port 53 -p 1-1024 <target> -oN spoofed_port_scan.txt

# Idle scan using a zombie host (completely stealthy)
nmap -sI <zombie_host> -p 80,443,445 <target> -oN idle_scan.txt

# Slow scan to evade IDS rate-based detection
nmap -sS -T1 --max-rate 10 -p 1-1024 <target> -oA stealth_scan

Step 6: Output Parsing and Reporting

# Convert XML output to HTML report
xsltproc full_tcp_scan.xml -o scan_report.html

# Extract open ports per host from grepable output
grep "Ports:" full_tcp_scan.gnmap | awk -F'Ports: ' '{print $1 $2}' > open_ports_summary.txt

# Parse XML with nmap-parse-output for structured data
nmap-parse-output full_tcp_scan.xml hosts-to-port 445

# Import into Metasploit database
msfconsole -q -x "db_import full_tcp_scan.xml; hosts; services; exit"

# Generate CSV for vulnerability management tools
nmap-parse-output full_tcp_scan.xml csv > scan_results.csv

Key Concepts

Tools & Systems

• Nmap 7.90+: Core scanning engine with NSE scripting, OS detection, version probing, and multiple output formats
• nmap-parse-output: Community tool for parsing Nmap XML output into structured formats (CSV, JSON, host lists)
• Ndiff: Nmap utility for comparing two scan results to identify changes in network state over time
• Zenmap: Official Nmap GUI providing visual network topology mapping and scan profile management
• Metasploit Framework: Imports Nmap XML output for direct correlation of scan results with exploit modules

Common Scenarios

Scenario: Enterprise Network Asset Discovery and Vulnerability Baseline

Context: A security team needs to establish a vulnerability baseline for a corporate network spanning 10.0.0.0/8 with approximately 5,000 active hosts. Scanning must complete within a weekend maintenance window with minimal network disruption.

Approach:

1. Run layered host discovery using ARP (local subnets), TCP SYN (ports 22,80,443,445,3389), and ICMP echo probes across all /24 subnets
2. Perform a full TCP SYN scan on discovered hosts using --min-rate 5000 and -T4 to complete within the window
3. Run service version detection and default NSE scripts on all open ports
4. Execute targeted NSE vulnerability scripts for critical services (SMB, SSL/TLS, HTTP)
5. Parse XML output to generate per-subnet CSV reports and import into the vulnerability management platform
6. Schedule Ndiff comparisons against future scans to track remediation progress

Pitfalls:

• Setting --min-rate too high on congested network segments causing packet loss and false negatives
• Running -T5 (Insane) timing on production networks, potentially overwhelming older network devices
• Forgetting to scan UDP ports, missing critical services like SNMP (161), DNS (53), and TFTP (69)
• Not saving output in XML format (-oX or -oA), losing structured data for downstream tool integration

Output Format

## Nmap Scan Summary

**Scan Profile**: Full TCP + Top 200 UDP + Service Enumeration
**Target Range**: 10.10.0.0/16
**Hosts Discovered**: 347 live hosts
**Scan Duration**: 2h 14m

### Critical Findings

| Host | Port | Service | Version | Vulnerability |
|------|------|---------|---------|---------------|
| 10.10.5.23 | 445/tcp | SMB | Windows Server 2012 R2 | MS17-010 (EternalBlue) |
| 10.10.8.100 | 443/tcp | Apache httpd | 2.4.29 | CVE-2021-41773 (Path Traversal) |
| 10.10.12.5 | 3306/tcp | MySQL | 5.6.24 | CVE-2016-6662 (RCE) |
| 10.10.3.77 | 161/udp | SNMP | v2c | Public community string |

### Recommendations
1. Patch MS17-010 on 10.10.5.23 immediately -- Critical RCE vulnerability
2. Upgrade Apache httpd to 2.4.58+ on 10.10.8.100
3. Upgrade MySQL to 8.0.x on 10.10.12.5 and restrict bind address
4. Change SNMP community strings from "public" on 10.10.3.77