Install Press C to copy Claude Cursor Codex Any chat
$ npx get-skill add ziyou-lu/gameplay-result-counting Copy Copied
Installs into ~/.claude/skills (or .claude/skills inside a project). Restart Claude Code to pick it up.
Download .zip Install Copied Save Share Link copied
+ Add to plugin
README badge [](https://skillmd.com/skills/ziyou-lu/gameplay-result-counting)Copy Copied
Trust & safety Audits pending Permissions this skill uses
Documentation only
No scripts, network access, or credentials are involved.
Works with Claude Code Claude.ai OpenAI Codex + Report a problem with this skill File contents 结果总分递增计数
效果预览
直接把总分摆出来;快速递增,准确停在同一总分;界面辅助|只动画显示值,不重复加分。
左侧为使用前,右侧为使用后;斜视 2.5D 短循环,用途示意(非引擎实测;音频相关预览仅示意触发关系,不含声音)。
触发与输入
用于结算界面逐步展示已确认总分,或跳过/重开后显示错误。取得权威结果 ID 与终值、显示初值、完成/失败状态、UI 生命周期及项目是否支持跳过。
实施流程
在结果确认时保存只读目标,真实计分/发奖先完成。计数刷新不得再次累计业务值。
从显示初值向终值插值并按显示规则取整;以进度结束时直接赋准确终值,避免逐次加小量造成累计误差。
若有完成文字逐字效果,独立驱动但与结果页生命周期一致,不能以文字结束判定胜利。
支持跳过时停止计数并立即显示终值;重复打开读取同一结果,不重新结算。
离开或换结果时取消旧动画,校验结果 ID,防止上一轮的延迟回调覆盖新结果。
调参
分别调总时长与速度曲线,用小分数、大分数、零和项目支持的负数检查。大分数不必逐个整数播放;结束时保留足够阅读时间,减少动效可直接展示终值。
验收与失败处理
正常结束、跳过、重复打开最终都等于同一权威结果。
动画重放不重复计分/发奖,中断无旧计数或文字残留。
新结果到达后旧回调无权写入;终值不符先查目标绑定/取整,不改实际奖励。
组合
完成收尾 管理控制与尾声,事件浮字 管理单次分数提示。
需要核对机制出处、示例参数或证据边界时,读取来源参考。
1 --- 2 name: gameplay-result-counting 3 description: "在完成/结算界面需要把已确认总分递增显示时设计只读计数动画;验证终值、支持的跳过和重开,不把动画刷新当成逐次得分或奖励发放。" 4 metadata: 5 source: https://skillmd.com/skills/ziyou-lu/gameplay-result-counting 6 --- 7 8 # 结果总分递增计数 9 10 ## 效果预览 11 12 直接把总分摆出来;快速递增,准确停在同一总分;界面辅助|只动画显示值,不重复加分。 13 14 左侧为使用前,右侧为使用后;斜视 2.5D 短循环,用途示意(非引擎实测;音频相关预览仅示意触发关系,不含声音)。 15 16  17 18 ## 触发与输入 19 20 用于结算界面逐步展示已确认总分,或跳过/重开后显示错误。取得权威结果 ID 与终值、显示初值、完成/失败状态、UI 生命周期及项目是否支持跳过。 21 22 ## 实施流程 23 24 1. 在结果确认时保存只读目标,真实计分/发奖先完成。计数刷新不得再次累计业务值。 25 2. 从显示初值向终值插值并按显示规则取整;以进度结束时直接赋准确终值,避免逐次加小量造成累计误差。 26 3. 若有完成文字逐字效果,独立驱动但与结果页生命周期一致,不能以文字结束判定胜利。 27 4. 支持跳过时停止计数并立即显示终值;重复打开读取同一结果,不重新结算。 28 5. 离开或换结果时取消旧动画,校验结果 ID,防止上一轮的延迟回调覆盖新结果。 29 30 ## 调参 31 32 分别调总时长与速度曲线,用小分数、大分数、零和项目支持的负数检查。大分数不必逐个整数播放;结束时保留足够阅读时间,减少动效可直接展示终值。 33 34 ## 验收与失败处理 35 36 - 正常结束、跳过、重复打开最终都等于同一权威结果。 37 - 动画重放不重复计分/发奖,中断无旧计数或文字残留。 38 - 新结果到达后旧回调无权写入;终值不符先查目标绑定/取整,不改实际奖励。 39 40 ## 组合 41 42 [完成收尾](../gameplay-completion-sequences/SKILL.md)管理控制与尾声,[事件浮字](../gameplay-floating-numbers/SKILL.md)管理单次分数提示。 43 44 需要核对机制出处、示例参数或证据边界时,读取[来源参考](references/sources.md)。
ziyou-lu/bkb-gameplay-skills commit e05f013221
Frequently asked questions How do I install the Gameplay Result Counting skill? Run npx get-skill add ziyou-lu/gameplay-result-counting in your terminal (requires Node.js), paste this page's agent-chat prompt into Claude, Cursor, or any MCP-connected agent, or download the SKILL.md file and copy it into your agent's skills directory.
What does the Gameplay Result Counting skill do? Gameplay Result Counting It is listed under Coding & Dev Tools on SkillMD.
Is Gameplay Result Counting safe to use? This skill has not completed SkillMD's automated safety review yet. Capability flags: docs only. SkillMD never runs a skill's scripts for you; review the SKILL.md before installing.
Which AI agents work with Gameplay Result Counting? This skill is tagged as working with Claude Code, Claude.ai, OpenAI Codex. SKILL.md is an open format, so most agents that read a skills directory can load it too.
Is Gameplay Result Counting free to use? Yes. Installing skills from SkillMD is free, and the skill stays under its author's original license.
Who published Gameplay Result Counting? ziyou-lu (@ziyou-lu) published this skill. Their other Agent Skills are listed on their SkillMD profile.