How do I install the Scienceworld Circuit Connector skill?

Run npx skillmds add zjunlp/scienceworld-circuit-connector in your terminal (requires Node.js), paste this page's agent-chat prompt into Claude, Cursor, or any MCP-connected agent, or download the SKILL.md file and copy it into your agent's skills directory.

Is Scienceworld Circuit Connector safe to use?

This skill has not completed SkillMD's automated safety review yet. Capability flags: docs only. SkillMD never runs a skill's scripts for you; review the SKILL.md before installing.

Which AI agents work with Scienceworld Circuit Connector?

This skill is tagged as working with Claude Code, Claude.ai, OpenAI Codex. SKILL.md is an open format, so most agents that read a skills directory can load it too.

Is Scienceworld Circuit Connector free to use?

Yes. Installing skills from SkillMD is free, and the skill stays under its author's original license.

Who published Scienceworld Circuit Connector?

zjunlp (@zjunlp) published this skill. Their other Agent Skills are listed on their SkillMD profile.

Scienceworld Circuit Connector by zjunlp

Name: Scienceworld Circuit Connector
Rating: 4.2 (5 reviews)
Author: zjunlp

Scienceworld Circuit Connector

This skill connects two electrical components (e.g., wires, batteries, devices) by their terminals to build or modify a circuit. Use when constructing electrical setups for testing, such as conductivity checks or device activation. The input includes two component identifiers and their connection points, and the output is an established electrical connection.

zjunlp 98a49e4 2 files · 4.2 KB Updated Sep 10, 2026

File contents

Instructions

Primary Action

Execute the connect OBJ to OBJ action. The syntax is connect <ComponentA> <TerminalA> to <ComponentB> <TerminalB>.

When to Use

Use this skill when you need to establish an electrical connection between two components as part of building a circuit for testing or device operation. Common scenarios include:

Building a circuit to test a material's conductivity.
Connecting a power source (battery) to a load (light bulb, buzzer).
Integrating a switch or sensor into a circuit.

Procedure

Identify Components: Locate the two components you need to connect (e.g., battery, black wire, unknown substance M, electric buzzer).
Identify Terminals: Examine the components if necessary to determine their available connection points (e.g., anode, cathode, terminal 1, terminal 2).
Formulate Command: Construct the connect command using the pattern: connect <ComponentA> <TerminalA> to <ComponentB> <TerminalB>.
- Example from trajectory: connect battery anode to black wire terminal 1
Execute: Issue the command. A successful observation will confirm the connection (e.g., "anode on battery is now connected to terminal 1 on black wire").

Key Principles

Circuit Logic: Ensure your connections follow basic electrical principles. A typical series circuit path might be: Battery (+) -> Wire -> Device -> Wire -> Battery (-).
Verification: After making connections, check the state of indicators (like lights or buzzers) or use the examine action on components to verify the circuit is complete and functional.
Error Handling: If a connection fails, verify the component and terminal names are correct. Some terminals may only accept one connection.

Related Skills

For disconnecting components, use the disconnect OBJ action.
To activate/deactivate a powered component in the circuit, use the activate OBJ/deactivate OBJ actions.
Refer to references/circuit_basics.md for common circuit diagrams and troubleshooting.

---name: scienceworld-circuit-connectordescription: This skill connects two electrical components (e.g., wires, batteries, devices) by their terminals to build or modify a circuit. Use when constructing electrical setups for testing, such as conductivity checks or device activation. The input includes two component identifiers and their connection points, and the output is an established electrical connection.---# Instructions## Primary ActionExecute the `connect OBJ to OBJ` action. The syntax is `connect <ComponentA> <TerminalA> to <ComponentB> <TerminalB>`.## When to UseUse this skill when you need to establish an electrical connection between two components as part of building a circuit for testing or device operation. Common scenarios include:* Building a circuit to test a material's conductivity.* Connecting a power source (battery) to a load (light bulb, buzzer).* Integrating a switch or sensor into a circuit.## Procedure1. **Identify Components:** Locate the two components you need to connect (e.g., `battery`, `black wire`, `unknown substance M`, `electric buzzer`).2. **Identify Terminals:** Examine the components if necessary to determine their available connection points (e.g., `anode`, `cathode`, `terminal 1`, `terminal 2`).3. **Formulate Command:** Construct the `connect` command using the pattern: `connect <ComponentA> <TerminalA> to <ComponentB> <TerminalB>`. * Example from trajectory: `connect battery anode to black wire terminal 1`4. **Execute:** Issue the command. A successful observation will confirm the connection (e.g., "`anode on battery is now connected to terminal 1 on black wire`").## Key Principles* **Circuit Logic:** Ensure your connections follow basic electrical principles. A typical series circuit path might be: Battery (+) -> Wire -> Device -> Wire -> Battery (-).* **Verification:** After making connections, check the state of indicators (like lights or buzzers) or use the `examine` action on components to verify the circuit is complete and functional.* **Error Handling:** If a connection fails, verify the component and terminal names are correct. Some terminals may only accept one connection.## Related Skills* For disconnecting components, use the `disconnect OBJ` action.* To activate/deactivate a powered component in the circuit, use the `activate OBJ`/`deactivate OBJ` actions.* Refer to `references/circuit_basics.md` for common circuit diagrams and troubleshooting.

Frequently asked questions