Nemoclaw User Manage Policy

Customize the Sandbox Network Policy

Gotchas

• Custom preset hosts bypass NemoClaw's review process and can widen sandbox egress to arbitrary destinations.

Prerequisites

• A running NemoClaw sandbox for dynamic changes, or the NemoClaw source repository for static changes.
• The OpenShell CLI on your PATH.

Add, remove, or modify the endpoints that the sandbox is allowed to reach.

The sandbox policy is defined in a declarative YAML file in the NemoClaw repository and enforced at runtime by NVIDIA OpenShell. NemoClaw supports both static policy changes that persist across restarts and dynamic updates applied to a running sandbox through the OpenShell CLI.

Note:

If the sandbox needs to reach an HTTP service running on the host, expose the service on a host IP that the OpenShell gateway can reach. Apply a custom NemoClaw preset with nemoclaw <sandbox> policy-add --from-file. Do not rely on host.docker.internal as a general host-service path because it bypasses the OpenShell policy path and may not be reachable in every sandbox runtime. See Agent cannot reach a host-side HTTP service (use the nemoclaw-user-reference skill).

Static Changes

Static changes modify the baseline policy file and take effect after the next sandbox creation.

Edit the Policy File

Open nemoclaw-blueprint/policies/openclaw-sandbox.yaml and add or modify endpoint entries.

If you want a built-in preset to be part of the baseline policy, merge its network_policies entries into this file and re-run nemoclaw onboard.

If you only need to apply a preset to a running sandbox, use nemoclaw <name> policy-add under Dynamic Changes. That updates the live policy and does not edit openclaw-sandbox.yaml.

Use a manual YAML edit when you need to allow custom hosts that are not covered by a preset, such as an internal API or a weather service.

Each entry in the network section defines an endpoint group with the following fields:

endpoints : Host and port pairs that the sandbox can reach.

binaries : Executables allowed to use this endpoint.

rules : HTTP methods and paths that are permitted.

Re-Run Onboard

Apply the updated policy by re-running the onboard wizard:

$ nemoclaw onboard

The wizard picks up the modified policy file and applies it to the sandbox.

Verify the Policy

Check that the sandbox is running with the updated policy:

$ nemoclaw <name> status

Add Blueprint Policy Additions

If you maintain a custom blueprint, you can add extra policy entries under components.policy.additions in nemoclaw-blueprint/blueprint.yaml. NemoClaw validates those entries with the same policy schema used by preset files, fetches the live policy during sandbox creation, merges the additions into network_policies, and applies the merged policy through OpenShell. The applied additions are recorded in the run metadata so you can audit which blueprint-level policy entries were active for that sandbox run.

Dynamic Changes

Dynamic changes apply a policy update to a running sandbox without restarting it.

[!WARNING] openshell policy set replaces the sandbox's live policy with the contents of the file you provide; it does not merge. A running sandbox's live policy is the baseline from openclaw-sandbox.yaml plus every preset that was layered on during onboarding. Applying a file that contains only the baseline (or only a single preset) silently drops every other preset that was in effect.

Option 1: Drop a Preset File and Use policy-add (Recommended)

This is the non-destructive path and the only flow NemoClaw supports out of the box for merging new entries into a running policy.

1. Create a preset-format YAML file under nemoclaw-blueprint/policies/presets/, for example nemoclaw-blueprint/policies/presets/influxdb.yaml:

   preset:
     name: influxdb
     description: "InfluxDB time-series database"
   network_policies:
     influxdb:
       name: influxdb
       endpoints:
         - host: influxdb.internal.example.com
           port: 8086
           protocol: rest
           enforcement: enforce
           rules:
             - allow: { method: GET, path: "/**" }
             - allow: { method: POST, path: "/api/v2/write" }
       binaries:
         - { path: /usr/bin/curl }
   

2. Apply it to the running sandbox:

   $ nemoclaw my-assistant policy-add
   

   NemoClaw reads the live policy via openshell policy get --full, structurally merges your preset's network_policies into it, and writes the merged result back. Existing presets and the baseline remain in place. The preset file under presets/ also persists across sandbox recreations.

Option 2: Snapshot, Edit, and Set via OpenShell

Use this path only when you cannot add a file under the NemoClaw source tree. You must start from the live policy, not from openclaw-sandbox.yaml, so the presets layered on at onboarding are preserved in the file you apply.

$ openshell policy get --full my-assistant > live-policy.yaml

Edit live-policy.yaml to add your entries under network_policies:, keeping the existing version field intact, then apply:

$ openshell policy set --policy live-policy.yaml my-assistant

Scope of Dynamic Changes

Dynamic changes apply only to the current session. When the sandbox stops, the running policy resets to the baseline composed from openclaw-sandbox.yaml plus the presets recorded for the sandbox. To make a custom policy survive a sandbox recreation, ship the preset file in the repository (Option 1 above — the file under presets/ persists) or edit openclaw-sandbox.yaml and re-run nemoclaw onboard.

Approve Requests Interactively

For one-off access, you can approve blocked requests in the OpenShell TUI instead of editing the baseline policy:

$ openshell term

This is useful when you want to test a destination before deciding whether it belongs in a permanent preset or custom policy file.

Policy Presets

NemoClaw ships preset policy files for common integrations in nemoclaw-blueprint/policies/presets/. Apply a preset as-is or use it as a starting template for a custom policy. For guided post-install examples, see Common Integration Policy Examples.

During onboarding, the policy tier (use the nemoclaw-user-reference skill) you select determines which presets are enabled by default. You can add or remove individual presets in the interactive preset screen that follows tier selection.

Available presets:

To apply a preset to a running sandbox:

$ nemoclaw <name> policy-add

Note:

Preset selection is interactive when you omit a preset name. Pass a preset name with --yes for scripted workflows.

For example, to interactively add PyPI access to a running sandbox:

$ nemoclaw my-assistant policy-add

To list which presets are applied to a sandbox:

$ nemoclaw <name> policy-list

To include a preset in the baseline, merge its entries into openclaw-sandbox.yaml and re-run nemoclaw onboard.

Note:

The openshell policy set --policy <file> <sandbox-name> command operates on raw policy files and does not accept the preset: metadata block used in preset YAML files. Use nemoclaw <name> policy-add for presets.

For scripted workflows, policy-add and policy-remove accept the preset name as a positional argument:

$ nemoclaw my-assistant policy-add pypi --yes
$ nemoclaw my-assistant policy-remove pypi --yes

Set NEMOCLAW_NON_INTERACTIVE=1 instead of --yes to drive the same flow from an environment variable. See Commands (use the nemoclaw-user-reference skill) for the full flag reference.

nemoclaw <name> rebuild reapplies every policy preset to the recreated sandbox, so presets survive an agent-version upgrade without manual reapplication.

Custom Preset Files

Apply a user-authored preset YAML to a running sandbox without editing the baseline or dropping to openshell policy set.

Authoring

A custom preset follows the same shape as the built-in ones under nemoclaw-blueprint/policies/presets/:

preset:
  name: my-internal-api
  description: "Internal service"
network_policies:
  my-internal-api:
    name: my-internal-api
    endpoints:
      - host: api.example.internal
        port: 443
        protocol: rest
        enforcement: enforce
        rules:
          - allow: { method: GET, path: "/**" }
    binaries:
      - { path: /usr/local/bin/node }

The top-level preset.name must be a lowercase RFC 1123 label (letters, digits, hyphens) and must not collide with a built-in preset name such as slack or pypi. Rename preset.name if NemoClaw refuses to apply the file because of a collision.

Apply a Single File

$ nemoclaw my-assistant policy-add --from-file ./presets/my-internal-api.yaml

Preview the endpoints without applying with --dry-run, and skip the confirmation prompt with --yes or by exporting NEMOCLAW_NON_INTERACTIVE=1.

Apply Every File in a Directory

$ nemoclaw my-assistant policy-add --from-dir ./presets/ --yes

Files are processed in lexicographic order. Processing stops at the first failure; presets already applied are not rolled back. Fix the failing file and re-run the command to continue.

Warning:

Custom preset hosts bypass NemoClaw's review process and can widen sandbox egress to arbitrary destinations. Review every host in a custom preset before applying it, especially when the file originates outside your team.

Load references/customize-network-policy-details.md for detailed steps on Remove a Custom Preset.

References

• references/integration-policy-examples.md — Guides users through common post-install integration policy setup for maintained NemoClaw policy presets, including Outlook, messaging channels, GitHub, Jira, Brave Search, package managers, Hugging Face, local inference, and OpenShell approval workflows.
• Load references/approve-network-requests.md when approving or denying sandbox egress requests, managing blocked network calls, or using the approval TUI. Reviews and approves blocked agent network requests in the TUI.
• Load references/customize-network-policy-details.md when you need detailed steps for Remove a Custom Preset.

Related Skills

• Approve or Deny Agent Network Requests for real-time operator approval.
• Common Integration Policy Examples for maintained preset examples such as Outlook, messaging, GitHub, Jira, Brave Search, package managers, Hugging Face, and local inference.
• nemoclaw-user-reference — Network Policies (use the nemoclaw-user-reference skill) for the full baseline policy reference
• OpenShell Policy Schema for the full YAML policy schema reference.
• OpenShell Sandbox Policies for applying, iterating, and debugging policies at the OpenShell layer.