Zhonghao1995
- 29 skills
- 0 followers
- 9 hours ago last updated
- ▌ Mike Plot · zhonghao1995Produce publication-style figures from MIKE+ .res1d results via the mike-plus MCP server — a stacked rainfall-runoff hydrograph, a single time series, a network map, a baseline-vs-scenario overlay, or a longitudinal profile (bed / crown / ground / max water level along a pipe string), in the house style (Arial 12, ticks inward, SI units, no title). Use when an agent must render MIKE+ results as a PNG without opening the GUI. No license required.
- ▌ Mike Rain · zhonghao1995Turn a timestamped rainfall CSV (design storm, gauge record, climate-scenario series) into a MIKE+ rainfall .dfs0 via the mike-plus MCP server, verified by read-back, ready to drive a model's rainfall boundary or to sit on top of a hydrograph figure. Use when the user brings rain as CSV or asks to run a model with a different storm. No license required (writing the file); wiring it into the model needs one.
- ▌ Mike Audit · zhonghao1995Record provenance for an Agentic MIKE+ step via the mike-plus MCP server — a manifest.json tying the model copy, inputs, edits, run QA status, result files and figures together, each file with a sha256. Use at the end of every run/compare/plot task (successful or failed) so the work can be audited, re-compared or reproduced later. No license required.
- ▌ Mike Model · zhonghao1995Inspect a MIKE+ .sqlite model via the mike-plus MCP server — active simulation/scenario/model type, unit system, the list of simulation setups and scenarios, element counts — and switch the active scenario. Use when an agent needs to understand a MIKE+ model before running or editing it, or must run a scenario prepared in the GUI. Requires MIKE+ installed + a license.
- ▌ Mike Import · zhonghao1995Bring an EPA SWMM (.inp) or EPANET (.inp) model into MIKE+ via the mike-plus MCP server — the bridge from an INP builder such as SWMMCanada or agentic-swmm into a MIKE+ database that mike_model_info / mike_run can use. Use when the user has an .inp and wants it in MIKE+. Requires MIKE+ installed + a checked-out license (demo mode caps the model size).
- ▌ Mike Params · zhonghao1995Read and modify MIKE+ model parameters via the mike-plus MCP server — inspect or change values in any model table (pipe Diameter/Manning in msm_Link, node levels in msm_Node, catchment properties in msm_Catchment, etc.). Use when an agent must identify a current parameter and change it before re-running. Requires MIKE+ + license; mutating tools must run on a copy.
- ▌ Mike Runner · zhonghao1995Run MIKE+ simulations headless via the mike-plus MCP server and report result files + engine status. Use when an agent must execute a MIKE+ .sqlite model's active (or a named) simulation without opening the MIKE+ GUI, then hand the .res1d outputs to reading/plotting. Requires MIKE+ installed + a valid license. Always run on a copy.
- ▌ Mike Compare · zhonghao1995Compare two MIKE+ runs via the mike-plus MCP server — baseline vs scenario, before vs after a parameter edit — to say WHERE a change mattered and BY HOW MUCH (delta peak, delta volume, timing shift, RMSE/NSE) and to draw the overlay hydrograph. Use whenever two .res1d files of the same model exist or a re-run just finished. Comparing needs no license; producing the second run does.
- ▌ Mike Results · zhonghao1995Read MIKE+ .res1d results via the mike-plus MCP server — list contents, summarize peaks, extract a single time series, or check which nodes flood (peak water level vs ground level). Use when an agent needs to inspect or pull numbers from MIKE+ network results (node water levels, link/reach discharge, velocities, flooding). No MIKE+ license or installation required.
- ▌ Mike End To End · zhonghao1995Standard operating procedure for an auditable, headless MIKE+ workflow via the mike-plus MCP server — how to plan, copy, run, QA-gate, compare, plot, audit, and safely stop. Use FIRST whenever an agent is handed a MIKE+ model (.sqlite) or result (.res1d) plus a plain-language goal; it picks the operating mode and tells the agent which mike-* skill to open next and in what order.
- ▌ Swmm Gis · zhonghao1995 bundleGIS/DEM preprocessing for SWMM experiments using the user's own QGIS/GRASS layers. Use when the user asks to (1) delineate subcatchments through QGIS/GRASS (standard or entropy-guided), (2) preprocess QGIS-derived subcatchment polygons into builder-ready CSV, (3) identify high-entropy hotspot subcatchments, or (4) expose QGIS/GRASS-backed preprocessing as MCP tools for reproducible workflows. For bbox-only inputs WITHOUT real pipe data, use `swmm-anywhere` instead (it synthesises a plausible network from OSM streets + DEM).
- ▌
- ▌ Swmm Canada · zhonghao1995Fetch a ready-to-run SWMM model for any Canadian area from the SWMMCanada upstream service — real published municipal storm pipes where a supported city covers the AOI, synthesized elsewhere in Canada. Input is a bbox or GeoJSON polygon plus a rainfall date window. Use for Canadian locations; outside Canada route to swmm-anywhere instead. Documentation contract only — the runtime tool is the in-process fetch_swmm_from_canada; there is no script or MCP server in this skill.
- ▌ Swmm Params · zhonghao1995 bundleDeterministic mapping from land use and soil texture to SWMM runoff/subarea and Green-Ampt infiltration parameters. Use when generating first-pass subcatchment parameter tables for swmm-builder.
- ▌ Swmm Report · zhonghao1995 bundleGenerate a client-deliverable Word (.docx) report from an audited SWMM run directory. Reads manifest.json, experiment_provenance.json, model_diagnostics.json, comparison.json, and any PNG figures — SWMM is never re-run. Supports custom YAML/JSON section templates.
- ▌ Swmm Runner · zhonghao1995 bundleRun EPA SWMM (swmm5) simulations reproducibly and extract key metrics from the report file. Use when an agent needs to (1) run a .inp via swmm5 CLI, (2) generate a run directory with rpt/out + manifest, (3) extract peak flow/time for a node/outfall, (4) parse SWMM continuity (Runoff Quantity / Flow Routing) errors from .rpt, or (5) compare two .rpt files (e.g. GUI vs CLI) for equivalence.
- ▌ Skill Author · zhonghao1995 bundleDraft a well-formed new skill (a SKILL.md scaffold, optionally with scripts/references) from a described recurring need, for human review and approval. Use whenever a repeated workflow gap has no existing skill covering it, when someone wants to propose or create a new skill or capability, or when an agentic system detects a recurring problem that warrants a brand-new skill rather than editing an existing one. Domain-general — works for any modeling or workflow domain; SWMM is just one example.
- ▌ Swmm Builder · zhonghao1995 bundleAssemble a runnable SWMM INP deterministically from subcatchment geometry/attributes, merged parameter JSON, network JSON, and climate references. Use when creating auditable INP + manifest artifacts for downstream swmm-runner/calibration.
- ▌ Swmm Climate · zhonghao1995 bundleDeterministic rainfall/climate formatting for SWMM. Use when converting timestamped rainfall CSV files into SWMM-ready [TIMESERIES] lines and [RAINGAGES] helper snippets for swmm-builder.
- ▌ Swmm Network · zhonghao1995 bundleNetwork QA of an existing INP (disconnected nodes, missing outfalls, adverse or zero slopes) is one call, network_qa, so call it first. Also builds, validates and routes SWMM pipe-network models from raw municipal shapefiles or structured GIS/CAD exports. Use when handling junctions, conduits, outfalls, xsections, network field-mapping configs, or wiring subcatchments to upstream nodes. Requires real pipe data as SHP / GeoJSON / CSV — native CAD (DXF/DWG) is not parsed and must first be exported to one of these. For data-scarce areas where only a bbox is available and no pipe inventory exists, use `swmm-anywhere` instead.
- ▌ Swmm Anywhere · zhonghao1995 bundleSynthesize a plausible SWMM drainage network from public data (OSM streets + DEM) when NO real pipe-network data exists — input is just a bbox. Use ONLY when the user has no pipe shapefile/CAD/GIS data, or to establish a baseline before real data arrives; if real pipe data exists, route to swmm-network or swmm-gis instead.
- ▌ Swmm End To End · zhonghao1995 bundleTop-level orchestration skill for agentic SWMM modelling. Use when an agent needs one entrypoint that decides which module tools to run, in what order, and when to stop, for example to build, run, QA, and optionally calibrate a SWMM case from prepared or partially prepared inputs.
- ▌ Swmm RAG Memory · zhonghao1995 bundleRetrieve relevant Agentic SWMM modeling memory from audited runs, modeling-memory summaries, and Obsidian-compatible notes at query time. Use when a user asks for RAG, similar past runs, evidence-linked memory retrieval, historical QA/failure patterns, or memory-grounded answers.
- ▌ Swmm Calibration · zhonghao1995 bundleCalibration and validation scaffold for EPA SWMM. Use when an agent needs to (1) compare simulated vs observed flow, (2) evaluate candidate parameter sets, (3) rank explicit candidates by an objective, (4) run a bounded random / LHS / adaptive search for the best-fitting parameters, (5) run a publication-grade SCE-UA calibration with KGE as the primary objective and (r, alpha, beta) decomposition reported, or (6) run a DREAM-ZS Bayesian calibration producing a posterior over parameters with Gelman-Rubin convergence checks. Dedicated sensitivity-analysis methods (OAT, Morris, Sobol') now live on the `swmm-uncertainty` skill.
- ▌ Swmm Uncertainty · zhonghao1995 bundleParameter and forcing uncertainty for EPA SWMM. Without observed flow, call propagate_parameter_ranges (global ranges, one SWMM run per sample, peak spread); the Morris/OAT/Sobol tools need an observed series. Use when an agent needs to (1) propagate parameter uncertainty through SWMM (fuzzy alpha-cut or Monte Carlo), (2) quantify hydrograph envelopes or output entropy without treating the run as calibration, (3) screen which parameters matter using OAT / Morris elementary-effects / Sobol' indices, (4) generate a rainfall ensemble (observed-series perturbation or IDF-curve design storms) and aggregate the resulting hydrograph envelope, or (5) build the integrated paper-reviewer-facing uncertainty source decomposition (`uncertainty_source_summary.md` + `uncertainty_source_decomposition.json`) over the raw outputs of the prior steps.
- ▌ Swmm Design Review · zhonghao1995 bundleScore a completed SWMM run against a configurable YAML rulebook of design checks — GB50014-style standards for real catchments, or the reference-free physical-plausibility rulebook for synthesized networks. Reads the run's existing manifest.json / model.rpt / model.inp and never re-runs SWMM. Use it post-run for compliance or plausibility review; continuity gating stays with postflight.
- ▌ Swmm Water Quality · zhonghao1995 bundleComplete SWMM engine coverage: pollutant buildup/washoff simulation support and load reporting. Validate water-quality config JSON, build INPs with WQ sections, and extract pollutant load summaries from completed runs.
- ▌ Swmm Modeling Memory · zhonghao1995 bundleRead historical Agentic SWMM experiment audit artifacts and summarize repeated assumptions, QA issues, failures, missing evidence, run-to-run differences, lessons learned, and controlled skill update proposals. Use downstream of swmm-experiment-audit when multiple audited runs exist or when a user asks for modeling memory, failure-pattern extraction, lessons learned, or human-reviewed skill refinement proposals.
- ▌ Swmm Experiment Audit · zhonghao1995 bundleConsolidate Agentic SWMM run artifacts into auditable provenance, comparison records, and local Obsidian audit notes. Use after any SWMM build/run/QA attempt, successful or failed, when an agent or CLI workflow needs a traceable record of inputs, commands, artifacts, metrics, QA checks, run-to-run differences, and first-user-friendly Obsidian visualization.