azusagasaku Network BGP Diagnostics
Use this skill when a BGP session is down, flapping, established with missing routes, or advertising unexpected prefixes. The default workflow is read-only evidence collection; policy and reset actions belong in a reviewed change window.
When to Use
- BGP neighbors are stuck in Idle, Connect, Active, OpenSent, or OpenConfirm.
- A session is Established but expected prefixes are missing.
- A route-map, prefix-list, max-prefix limit, or AS path policy may be filtering routes.
- You need before/after evidence for a BGP change.
- You are reviewing automation that parses BGP summary output.
Read-Only Triage Flow
- Identify the exact neighbor, address family, VRF, and local/remote ASNs.
- Capture summary state and last reset reason.
- Prove reachability to the peer source address.
- Check route policy references before assuming transport failure.
- Compare advertised, received, and installed routes where the platform supports those commands.
show bgp summary
show bgp neighbors <peer>
show ip route <peer>
show tcp brief | include <peer>|:179
show logging | include BGP|<peer>
show running-config | section router bgp
show ip prefix-list
show route-map
Use platform-specific address-family commands when the device uses VRFs, IPv6, VPNv4, or EVPN. Do not assume global IPv4 unicast.
State Interpretation
| State | First checks |
|---|---|
| Established with prefix count | Route exchange is up; inspect policy and table selection |
| Established with zero prefixes | Check inbound policy, max-prefix, advertised routes, and AFI/SAFI |
| Active | TCP session is not completing; check routing, source, ACLs, and peer reachability |
| Connect | TCP connection is in progress; check path and remote listener |
| OpenSent/OpenConfirm | TCP works; check ASN, authentication, timers, capabilities, and logs |
| Idle | Neighbor may be disabled, missing config, blocked by policy, or backoff timer |
Transport Checks
ping <peer> source <local-source>
traceroute <peer> source <local-source>
show ip route <peer>
show bgp neighbors <peer> | include BGP state|Last reset|Local host|Foreign host
If the peer is sourced from a loopback, confirm both directions route to the loopback addresses and that the neighbor config uses the expected update source.
Avoid disabling ACLs or firewall policy as a diagnostic shortcut. Read hit counters, logs, and path state first.
Route Policy Checks
show bgp neighbors <peer> advertised-routes
show bgp neighbors <peer> routes
show ip prefix-list <name>
show route-map <name>
show bgp <prefix>
Some platforms require additional configuration before received-routes is
available. Do not add that configuration during incident triage unless the
operator approves the change.
AS Path And Prefix Review
show bgp regexp _65001_
show bgp regexp ^65001$
show bgp <prefix>
show bgp neighbors <peer> advertised-routes | include Network|Path|<prefix>
Use AS-path regex carefully. _65001_ matches AS 65001 as a token. Plain
65001 can match longer ASNs or unrelated text.
Parser Pattern
import re
from typing import Any
BGP_SUMMARY_RE = re.compile(
r"^(?P<neighbor>\d{1,3}(?:\.\d{1,3}){3})\s+"
r"(?P<version>\d+)\s+"
r"(?P<remote_as>\d+)\s+"
r"(?P<msg_rcvd>\d+)\s+"
r"(?P<msg_sent>\d+)\s+"
r"(?P<table_version>\d+)\s+"
r"(?P<input_queue>\d+)\s+"
r"(?P<output_queue>\d+)\s+"
r"(?P<uptime>\S+)\s+"
r"(?P<state_or_prefixes>\S+)$",
re.M,
)
def parse_bgp_summary(raw: str) -> list[dict[str, Any]]:
rows = []
for match in BGP_SUMMARY_RE.finditer(raw):
state_or_prefixes = match.group("state_or_prefixes")
if state_or_prefixes.isdigit():
state = "Established"
prefixes_received = int(state_or_prefixes)
else:
state = state_or_prefixes
prefixes_received = None
rows.append({
"neighbor": match.group("neighbor"),
"remote_as": int(match.group("remote_as")),
"state": state,
"prefixes_received": prefixes_received,
"uptime": match.group("uptime"),
})
return rows
Prefer structured parser output when available, but store raw output with the incident record because BGP summary formats vary by platform and address family.
Change-Window Only
These actions can affect routing and should not be suggested as automatic diagnostics:
- Clearing a BGP session.
- Changing neighbor authentication, timers, update source, route-maps, or prefix-lists.
- Enabling additional received-route storage.
- Relaxing firewall, ACL, or control-plane policy.
If a reset is approved, prefer the least disruptive soft or route-refresh option supported by the platform and document exactly why it is safe.
Anti-Patterns
- Assuming
Activealways means the remote side is down. - Ignoring VRF, address family, or update-source differences.
- Using broad AS-path regex without token boundaries.
- Hard-resetting a peer before reading last reset reason and logs.
- Treating missing
received-routesoutput as proof that no routes arrived.
See Also
- Skill:
cisco-ios-patterns - Skill:
network-config-validation - Skill:
network-interface-health