Tunnel Connect

Connect to Virtuoso

Establish connection to Cadence Virtuoso via the virtuoso-cli bridge.

Quick Connect (from RAMIC Bridge Banner)

When user shows you the RAMIC Bridge banner like this:

┌─────────────────────────────────────────┐
│  vcli (Virtuoso CLI Bridge) — Ready     │
├─────────────────────────────────────────┤
│  Session : 4e3898b12b7c-user-6           │
│  Port    : 38669                         │
│  SSH     : 2222                          │
│  Version : 0.3.2                         │
│  Daemon  : ~/.cargo/bin/virtuoso-daemon  │
├─────────────────────────────────────────┤
│  Terminal: vcli skill exec 'version()'  │
│  Sessions: vcli session list            │
└─────────────────────────────────────────┘

Use these commands to connect:

# 1. Create SSH tunnel
ssh -f -N -L <Port>:127.0.0.1:<Port> -p <SSH> user@localhost

# 2. Test connection
VB_PORT=<Port> VB_SESSION=<Session> vcli skill exec '1+1'

Example from the banner above:

ssh -f -N -L 38669:127.0.0.1:38669 -p 2222 user@localhost
VB_PORT=38669 VB_SESSION=4e3898b12b7c-user-6 vcli skill exec '1+1'

Local mode

1. Ensure Virtuoso is running with the bridge loaded in CIW:

   load("/path/to/virtuoso-cli/resources/ramic_bridge.il")
   

2. Set environment and test:

   export VB_REMOTE_HOST=localhost
   virtuoso tunnel status --format json
   virtuoso skill exec "1+1"
   

Remote mode (Docker/Remote)

1. Initialize config: virtuoso init
2. Edit .env — set VB_REMOTE_HOST at minimum
3. Start tunnel: virtuoso tunnel start
4. Verify: virtuoso tunnel status --format json

Troubleshooting

• Daemon exits immediately: Check RBPython points to a valid python3 binary (use full path like /usr/bin/python3)
• Connection reset: The daemon may have crashed — check if conn.shutdown() error in /tmp/RB.log; restart with RBDLog = t then RBStop() then RBStart() in CIW
• Port already in use: Run RBStopAll() in CIW, or change VB_PORT in .env
• Multiple sessions: Use VB_SESSION to specify which session to connect to

Jump Host Misconfig Cheat Sheet

The single most common "I connected but I don't see my cells" problem is pointing VB_REMOTE_HOST at the jump host instead of the compute host where Virtuoso actually runs. vcli tunnel status now detects this automatically — see daemon.hostname_check in the JSON output, or look for the ⚠ hostname mismatch block in Table mode.

       local box          jump host          compute host
          │            (bastion / SSH)        (Virtuoso)
          │                   │                    │
   vcli ──┴── SSH ──────────▶│  SSH ────────────▶ │
   env:                        ENV:                ENV:
     VB_REMOTE_HOST = compute-eda-42  ← the COMPUTE host
     VB_JUMP_HOST   = bastion-01      ← the JUMP host

Symptoms

• vcli rpc call --method cell.info --params '{"lib":"myLib",...}' returns library not found even though the library exists in the Virtuoso CIW window
• vcli session list shows a session file with the wrong host field
• getHostName() on the remote daemon returns the bastion hostname, not the EDA server hostname
• vcli tunnel status --format json | jq .daemon.hostname_check.mismatch is true

Diagnostic recipe

# 1. See what the daemon reports
vcli --session $VB_SESSION tunnel status --format json | \
  jq '.daemon.hostname_check'
# {
#   "configured": "bastion-01",   ← wrong! this is the jump host
#   "actual":     "compute-eda-42",
#   "mismatch":   true
# }

# 2. Cross-check what getHostName() returns directly
vcli --session $VB_SESSION rpc call --method cell.info \
  --params '{"lib":"tsmcN28","cell":"INVX2"}' --format json
# If this succeeds, the daemon CAN reach the cell DB — your
# code's library path is just wrong, not the network.

# 3. Check who the SSH session is actually logged in as
ssh -J $VB_JUMP_HOST $VB_REMOTE_HOST 'hostname && whoami'

# 4. Check the local state files for the wrong host
ls ~/.cache/virtuoso_bridge/sessions/
cat ~/.cache/virtuoso_bridge/sessions/<id>.json | jq .host

Fix

Why this matters

VB_REMOTE_HOST is what the daemon binds to and what getHostName() should return. If the jump host has any kind of CIW (e.g. a user inadvertently ran load("ramic_bridge.il") there), the daemon will happily come up on the jump host — your SSH tunnel works, your session file is written, but every library lookup fails because the jump host has no cds.lib pointing to your design.

vcli tunnel status is the fast way to catch this: if the hostname_check.mismatch is true, stop debugging and fix VB_REMOTE_HOST first — every other "library not found" error message after that is a downstream symptom.