Bio Chipseq Spike In Normalization

Version Compatibility

Reference examples tested with: DiffBind 3.20+, DESeq2 1.42+, edgeR 4.0+, csaw 1.36+, ChIPseqSpikeInFree 1.6+, SpikChIP 1.0+, SpikeFlow (NAR Genom Bioinform 2024), samtools 1.19+, bowtie2 2.5+.

ChIP-seq Spike-In Normalization

"Account for global signal changes that defeat standard normalization" -> Add exogenous reference chromatin (Drosophila for human/mouse ChIP-Rx; E. coli carryover for CUT&RUN/CUT&Tag) at fixed concentration BEFORE IP, derive scaling factors from spike-in read counts, and apply at the read or size-factor level (never to peak counts) to enable quantitative cross-condition comparison.

• CLI: align reads to combined target + spike genome; count spike reads via samtools view -c
• R (DiffBind integration): dba.normalize(obj, spikein = TRUE)
• R (DESeq2 / edgeR): sizeFactors(dds) <- 1 / scale_factors (note inverse)
• CLI (deepTools tracks): bamCoverage --scaleFactor <derived> (use alone; --normalizeUsing compounds with it)
• Wrapper: SpikeFlow (Snakemake; 2024) automates end-to-end
• Post-hoc detection: ChIPseqSpikeInFree (when no spike-in was added)

The fundamental rule: spike-in scaling is applied at the READ level (via size factors or --scaleFactor), never multiplied into peak counts. This is a common implementation error in published spike-in ChIP.

When Spike-In Is Required

Why this is necessary: Standard normalization (RLE on reads-in-peaks, TMM on bins) assumes most regions don't change. When the perturbation IS the change-everything-globally biology, these methods force the median log2FC to zero, hiding the real effect.

Spike-In Protocol Taxonomy

The dominant standard for human/mouse ChIP is Drosophila (ChIP-Rx). Drosophila is genetically distinct enough that mapping is unambiguous, and the genome size (~140 Mb) gives adequate read depth at small chromatin input.

Scaling Factor Calculation

RRPM (Orlando 2014): reference-adjusted reads per million.

scale_factor_i = min(N_spike) / N_spike_i

Apply at the read level. The sample with the fewest spike reads gets scale_factor = 1 (the maximum); others get < 1 (scaled down because they recovered more spike chromatin).

Rx-Input (Fursova 2019): additionally scales by input spike-in to correct IP efficiency variation.

RxInput_i = (N_spike_chip_i / N_total_chip_i) / (N_spike_input_i / N_total_input_i)

This is more rigorous when input controls are available; required for some inhibitor experiments where IP efficiency itself changes.

Workflow: Drosophila ChIP-Rx Spike-In

Goal: Compute per-sample scaling factors from Drosophila spike-in reads and apply at the read level (not peak counts) to enable quantitative cross-condition ChIP-seq comparison.

Approach: Align reads to combined target + Drosophila genome, count spike reads at high mapq after deduplication, derive RRPM scaling factors (min/each), then apply via DESeq2 sizeFactors, DiffBind spike-in flag, or bamCoverage scaleFactor. Validate against internal-control regions (blacklist).

Step 1: Alignment to combined genome

# Build combined index (target + Drosophila)
cat hg38.fa dm6.fa > hg38_dm6.fa
bowtie2-build hg38_dm6.fa hg38_dm6

# Align reads
bowtie2 -x hg38_dm6 -1 R1.fq -2 R2.fq -S aln.sam --very-sensitive --no-mixed
samtools view -bS aln.sam | samtools sort -o aln.bam
samtools index aln.bam

Step 2: Filter, deduplicate, count spike reads

# Apply ENCODE filter (-F 1804 -q 30) BEFORE counting spike reads
samtools view -F 1804 -q 30 -b aln.bam > aln.filt.bam
samtools index aln.filt.bam

# Count Drosophila reads (NOT total reads)
DROSO_READS=$(samtools view -c aln.filt.bam chr2L chr2R chr3L chr3R chr4 chrX chrY)
echo "$SAMPLE: Drosophila reads = $DROSO_READS"

# Separate into target-only BAM for peak calling
samtools view -b aln.filt.bam chr1 chr2 chr3 chr4 chr5 chr6 chr7 chr8 chr9 chr10 \
    chr11 chr12 chr13 chr14 chr15 chr16 chr17 chr18 chr19 chr20 chr21 chr22 chrX chrY \
    > aln.filt.hg38.bam
samtools index aln.filt.hg38.bam

Step 3: Compute scaling factors

# Per-sample Drosophila counts (assume saved in droso_counts.tsv)
# sample_id, droso_reads
# ctrl_1, 145000
# ctrl_2, 132000
# treat_1, 98000
# treat_2, 85000

awk 'BEGIN{min=1e10} NR>1{if($2<min) min=$2} END{print "min:", min}' droso_counts.tsv
# Use min as numerator: scale_factor_i = min / droso_reads_i

Step 4: Apply scaling — three layers

Layer 1: bigWig tracks

SCALE=$(echo "scale=6; $MIN_DROSO / $SAMPLE_DROSO" | bc)
bamCoverage -b sample.bam -o sample.scaled.bw \
    --scaleFactor $SCALE --binSize 10 --extendReads 200
# DO NOT also pass --normalizeUsing; deepTools multiplies the two factors together, reintroducing depth normalization

Layer 2: DiffBind

library(DiffBind)
dba_obj <- dba(sampleSheet = 'samples.csv')   # spike-in BAM in sample sheet
dba_obj <- dba.count(dba_obj, summits = 250, bParallel = TRUE)

# Spike-in normalization (spikein = TRUE forces library = DBA_LIBSIZE_BACKGROUND internally)
dba_obj <- dba.normalize(dba_obj, spikein = TRUE,
                          normalize = DBA_NORM_LIB)

# Verify what was applied
dba.normalize(dba_obj, bRetrieve = TRUE)

Layer 3: DESeq2 / edgeR direct

library(DESeq2)
# Read spike-in counts into a vector aligned with sample order
spike_reads <- c(ctrl_1 = 145000, ctrl_2 = 132000, treat_1 = 98000, treat_2 = 85000)
scale_factors <- min(spike_reads) / spike_reads

dds <- DESeqDataSetFromMatrix(counts, coldata, design = ~ condition)
# DESeq2 expects sizeFactors in INVERSE convention (sample with smallest factor gets largest sizeFactor)
sizeFactors(dds) <- 1 / scale_factors
dds <- DESeq(dds, fitType = 'parametric')

Workflow: E. coli Spike-In (CUT&RUN/CUT&Tag Automatic)

E. coli DNA from bacterial pA-MNase/pA-Tn5 production is automatic spike-in carryover.

# Combined index
cat hg38.fa ecoli_k12.fa > hg38_ecoli.fa
bowtie2-build hg38_ecoli.fa hg38_ecoli

# Align as in ChIP-Rx; count E. coli reads
ECOLI_READS=$(samtools view -c aln.filt.bam ecoli_chr1)
TOTAL_READS=$(samtools view -c aln.filt.bam)
echo "E. coli fraction: $(echo "scale=4; $ECOLI_READS / $TOTAL_READS" | bc)"
# Target: 0.005-0.02 (0.5-2%); IgG: 0.02-0.05 (2-5%)

# Scale factor same as ChIP-Rx: min(ecoli) / per_sample_ecoli
# Apply at read or sizeFactors level

E. coli carryover is variable between enzyme production batches. For publication-grade cross-condition claims, supplement with deliberate Drosophila spike-in OR use a single enzyme lot across all experiments.

ChIPseqSpikeInFree: Post-Hoc Detection

When no spike-in was added, ChIPseqSpikeInFree (Jin 2020) attempts post-hoc detection of global shifts by analyzing signal-distribution shape changes.

library(ChIPseqSpikeInFree)

samples <- data.frame(
    ID = c('ctrl_1', 'ctrl_2', 'treat_1', 'treat_2'),
    BAM = c('ctrl_1.bam', 'ctrl_2.bam', 'treat_1.bam', 'treat_2.bam'),
    ANTIBODY = rep('H3K27me3', 4),
    GROUP = c('Control', 'Control', 'Treatment', 'Treatment')
)

res <- ChIPseqSpikeInFree(bamFiles = samples$BAM, chromFile = 'hg38.chrom.sizes',
                          metaFile = 'metadata.txt', prefix = 'spikein_free_out')
# Output: per-sample scaling factor + global-shift detection

Limitations: Heuristic; not a substitute for true spike-in. Use as:

1. Sanity check when spike-in was forgotten
2. Initial diagnosis before deciding whether spike-in is needed in next experiment
3. NOT for publication-grade claims

Internal-Control Sanity Check (Mandatory)

After applying spike-in scaling, internal-control regions should show NO signal change:

# Compute mean signal at blacklist regions per condition; should be stable
bedtools multicov -bams ctrl_1.bam ctrl_2.bam treat_1.bam treat_2.bam \
    -bed hg38-blacklist.v2.bed > blacklist_signal.tsv
# Apply scaling factors to per-sample counts; verify no shift across conditions

If internal controls shift after scaling, the normalization is broken. Common causes:

1. Scaling applied to peak counts instead of read counts
2. Spike-in reads not deduplicated before scaling
3. Spike-in genome not mapq-filtered (low-quality alignments inflated counts)
4. Spike-in saturated (>1M reads); titration not linear

Per-Tool Failure Modes

Scaling factor applied to peak counts instead of read counts

Trigger: Multiplying peak-by-sample count matrix entries by spike-in factor.

Mechanism: Peak counts already integrate over read counts; multiplying them double-corrects.

Symptom: Effect sizes 2-10× larger than expected biology; internal control regions also "shift" artifactually.

Fix: Apply via sizeFactors(dds) (DESeq2), normFactors (edgeR), or DiffBind's dba.normalize(..., library=<numeric vector>, normalize=DBA_NORM_LIB) to supply spike-in-derived library sizes, OR --scaleFactor (bamCoverage for tracks). Never multiply peak-level counts.

Spike-in reads not deduplicated before scaling

Trigger: Counting all aligned reads to spike genome including duplicates.

Mechanism: PCR duplicates of spike-in reads vary independently of input chromatin amount.

Symptom: Scaling factors poorly correlated with library prep batch; high inter-replicate variability.

Fix: Deduplicate with MarkDuplicates; apply ENCODE filter -F 1804 -q 30 before counting spike reads.

Spike-in mapq filter too loose

Trigger: Counting all reads aligning to spike genome.

Mechanism: Low-mapq reads at low-complexity regions (E. coli rRNA, Drosophila satellite) are often misaligned from host genome.

Fix: Apply -q 30 (high mapq) before counting spike reads.

Inverse convention errors with DESeq2 / edgeR

Trigger: Passing scale_factors directly to sizeFactors(dds) without inversion.

Mechanism: DESeq2 / edgeR DIVIDE counts by sizeFactors (normalized = counts / sizeFactor); a read-level spike-in scale factor multiplies reads, so it must be applied as its inverse. Convention difference.

Symptom: Effect sizes inverted (treatment shifted in wrong direction).

Fix: sizeFactors(dds) <- 1 / scale_factors (inverse). Verify with internal-control sanity check.

--normalizeUsing and --scaleFactor conflict in bamCoverage

Trigger: Passing both for spike-in scaled bigWig.

Mechanism: deepTools multiplies the --scaleFactor value by the factor computed from --normalizeUsing; adding --normalizeUsing therefore reintroduces library-depth normalization on top of the spike-in factor. The default --normalizeUsing None leaves --scaleFactor acting alone.

Fix: Use ONE: --scaleFactor alone for spike-in; --normalizeUsing alone otherwise. Verify via bamCoverage --help.

E. coli carryover inconsistent across enzyme batches

Trigger: Comparing CUT&Tag samples processed with different pA-Tn5 lots.

Mechanism: E. coli carryover varies between bacterial production batches; cross-batch comparison adds artificial variability.

Fix: Use single enzyme lot for cross-condition comparison; OR supplement E. coli with deliberate Drosophila spike-in.

ChIPseqSpikeInFree applied as primary normalization

Trigger: No spike-in was added; ChIPseqSpikeInFree used for publication-grade scaling.

Mechanism: ChIPseqSpikeInFree infers global shift from signal-distribution shape; this is a heuristic, not a measurement.

Fix: Use only as diagnostic. For publication, re-do experiment with deliberate spike-in.

Spike-in titration not verified linear

Trigger: Spike-in concentration too high (>5% of total reads) OR too low (<0.1%).

Mechanism: Outside linear range, scaling factor doesn't reflect actual ratio of input chromatin.

Symptom: Replicate-to-replicate scaling factor variability >2×.

Fix: Verify titration linearity by varying spike-in concentration on a single sample; only use spike-in counts in linear range (typically 0.5-5% of total reads).

Reconciliation

Common Errors

References

• Orlando DA et al 2014 Cell Rep 9:1163 (ChIP-Rx framework)
• Egan B et al 2016 PLoS One 11:e0166438 (ChIP-Rx protocol; fixed Drosophila chromatin mass)
• Bonhoure N et al 2014 Genome Res 24:1157 (alternative Drosophila spike-in)
• Fursova NA et al 2019 Mol Cell 74:1020 (Rx-Input scaling)
• Jin H et al 2020 Bioinformatics 36:1270 (ChIPseqSpikeInFree)
• Blanco E et al 2021 NAR Genom Bioinform 3:lqab064 (SpikChIP)
• 2024 NAR Genom Bioinform 6:lqae118 (SpikeFlow)
• Patel L, Cao Y, Mendenhall EM, Benner C, Goren A 2024 Nat Biotechnol 42:1343 (spike-in normalization review; common failure modes; PMC12266361)
• Stark R & Brown G 2011 Bioconductor (DiffBind with spikein parameter)

Related Skills

• chip-seq/peak-calling - Upstream peak calling
• chip-seq/chipseq-qc - Spike-in fraction QC
• chip-seq/differential-binding - Apply spike-in via DiffBind / DESeq2 / csaw
• chip-seq/cut-and-run-tag - E. coli spike-in carryover specifics
• chip-seq/super-enhancers - SE calling requires spike-in for cross-condition
• chip-seq/chipseq-visualization - Spike-in-scaled bigWig generation
• alignment-files/sam-bam-basics - Multi-genome alignment and chromosome filtering
• differential-expression/deseq2-basics - DESeq2 sizeFactors conventions