Batch Shipping

Batch Shipping

Purchases Are Live

Batch purchases charge the authorized Shippo account for real. Before PurchaseBatch, show the shipment count, carrier/service, and estimated total cost, and require explicit user confirmation.

Purchase Confirmation Gate

Before every call to PurchaseBatch, summarize the following and ask the user for explicit confirmation:

• Total number of shipments to be purchased
• Carrier and service level (or selection rule if varied)
• Estimated total cost
• Number of domestic vs international shipments

Do not proceed without explicit user confirmation.

CSV Batch Processing

See shippo/references/csv-format.md for the column specification.

1. Read and parse the CSV. Validate required columns are present. Report row count.
2. Validate each row for non-empty required fields. Report invalid rows with reasons.
3. Detect international rows (sender_country != recipient_country). Create customs declarations for those rows. See shippo/references/customs-guide.md. Use correct customs enum values: RETURN_MERCHANDISE (not RETURN) for returned goods, HUMANITARIAN_DONATION (not HUMANITARIAN) for charitable donations.
4. Build the batch_shipments array with inline address and parcel objects per row.
5. Call CreateBatch with the array.
6. Poll GetBatch until status is VALID or INVALID. See Polling Intervals below.
7. If the status is INVALID, some batch shipments failed validation: see "Fixing an INVALID batch" below, fix them, and re-poll until VALID. Report per-shipment failures either way before proceeding.
8. Confirm purchase (see Purchase Confirmation Gate above).
9. Call PurchaseBatch to buy labels for all valid shipments.
10. Poll GetBatch until status changes from PURCHASING to PURCHASED. See Polling Intervals below.
11. Report: total attempted, succeeded, failed. For successes: tracking_number and label_url (complete URL). For failures: error messages.

Retrieving batch labels

A purchased batch does not put each label URL inline on the batch object. Each entry in batch_shipments[] carries a transaction field, which is a Transaction object_id. Call GetTransaction on it to get that shipment's label_url and tracking_number. The batch-level label_url is a merged multi-label PDF (up to 100 labels per file) and cannot be split per order.

Batch Size Guidance

For batches over 500 shipments, consider splitting into multiple batches. Large batches take longer to validate and purchase, and a single failure can be harder to diagnose.

Polling Intervals

• For batches under 100 shipments: poll every 3-5 seconds.
• For batches with 100+ shipments: poll every 5-10 seconds.
• Report progress to the user every 30 seconds.
• Stop after 60 retries and suggest the user check back later using GetBatch with the batch object_id.

Batch with Rate Shopping

1. Call CreateShipment per shipment to get rate quotes (see Rate Shopping).
2. Present rates. User picks a service level rule (e.g., "cheapest for each" or a specific carrier/service).
3. Build batch_shipments with servicelevel_token per item.
4. Create, validate, confirm purchase, purchase, report as above.

Managing an Existing Batch

• Add shipments: AddShipmentsToBatch (before purchase only). Note: adding an invalid shipment will change the entire batch status to INVALID. Check per-shipment statuses after adding.
• Remove shipments: RemoveShipmentsFromBatch (before purchase only).

Fixing an INVALID batch

If GetBatch returns status INVALID, one or more batch shipments failed validation and the batch cannot be purchased until they are fixed.

1. Find the failures. Call GetBatch with object_results=creation_failed to return only the failed shipments (paginate with ?page= if there are many), or read each batch_shipments[].status (VALID / INVALID / INCOMPLETE / TRANSACTION_FAILED) and its messages for the reason. The batch-level errors array collects the same per-shipment failures in one place.
2. Fix them, either:
   • Remove: RemoveShipmentsFromBatch with the failed batch-shipment object_ids (from batch_shipments[].object_id, not the shipment object_id) to drop them, or
   • Correct and re-add: AddShipmentsToBatch with corrected shipment objects (fixed address, parcel, or servicelevel).
3. Re-poll GetBatch until status is VALID.
4. Then confirm purchase (see Purchase Confirmation Gate) and PurchaseBatch.

End-of-Day Manifest

1. Collect: carrier_account (object_id), shipment_date (YYYY-MM-DD, default today), address_from (pickup address).
2. Optionally collect specific transaction object_ids to scope the manifest. You must pass specific transaction object_ids -- there is no auto-include for a date range.
3. Call CreateManifest.
4. Poll GetManifest until status is SUCCESS or ERROR.
5. Return the manifest PDF URL(s) and shipment count.

Quick Reference

CSV batch: Parse CSV -> CreateCustomsDeclaration (international rows) -> CreateBatch -> poll GetBatch -> confirm -> PurchaseBatch -> poll GetBatch

Manifest: CreateManifest (with transaction object_ids) -> poll GetManifest