Xlflow

xlflow Skill

Purpose

Use xlflow as the proof loop for Excel VBA work. Do not treat generated VBA as complete until the workbook has been exported or inspected, source has been changed, changes have been imported, and the relevant macro or tests have been run.

Default safety rules for AI-agent work:

• Usually start with xlflow session start and stay in that session until the task is done.
• When a task involves creating, fixing, or reasoning about workbook-side tests, load references/testing.md before editing test VBA. It covers discovery rules, XlflowAssert helpers, lifecycle hooks, tags/filters, and failure diagnosis.
• If it is unclear whether source files or the workbook are newer, start the session and run xlflow pull --session --json.
• When [vba].folders=true, treat the filesystem layout under each configured [src] root as meaningful architecture. Nested directories map to Rubberduck-compatible @Folder(...) annotations during push.
• If push or run leaves the live session workbook unsaved, treat the live workbook as newer than disk until xlflow save --json.
• xlflow inspect workbook|sheets|range|used-range|cell reads the saved workbook file by default, but these commands accept --session when you need the live workbook currently open in Excel.
• Use xlflow list forms --session --json when you need workbook UserForm names or expected .frm / .frx source paths without loading the form at runtime.
• Use xlflow inspect form <FormName> --runtime|--designer|--both --session --json when you need structured UserForm state beyond saved worksheet snapshots. Runtime inspection executes against a temporary workbook copy of the current source state.
• Use xlflow form snapshot <FormName> --out src/forms/specs/<FormName>.yaml --session --json when you need a persisted JSON/YAML spec for design review or future declarative UserForm workflows. This path is stricter than inspect form --designer because it executes an injected helper to recover concrete control types.
• Use xlflow form build <spec> --session --json when you need to create a Designer-backed UserForm from a persisted spec under src/forms/specs/.
• Use xlflow form build <spec> --session --overwrite --json when the intended workflow is to replace an existing UserForm from spec rather than mutate it in place.
• Use xlflow form export-image <FormName> --out <path> --session --json when visual verification depends on the runtime-rendered UserForm rather than structured inspection alone. Treat it as secondary visual confirmation because the capture path is experimental; prefer inspect form or form snapshot as the authoritative shape/state source.
• When a task depends on UserForm spec authoring or review, load references/forms.md before choosing inspect form, form snapshot, or form build. It defines the persisted xlflow.userform schema, flat controls contract, overwrite safety rules, supported control types, and the best-effort versus observed-only fields that should not be treated as round-trip guarantees.
• When a task depends on MsgBox, InputBox, file pickers, or other interactive VBA prompts, load references/xlflow-ui.md before editing. Agent-authored dialog flows should default to XlflowUI wrappers with stable dialog ids so run and test can stay headless.
• When a dialog needs a workbook-side fallback if run or test omits a scripted response, use the optional DefaultResponse / DefaultValue parameters on XlflowUI.MsgBox, XlflowUI.InputBox, and the file dialog wrappers.
• When headless dialog flows need realtime terminal visibility, add --ui-stream to xlflow run or xlflow test. It streams resolved XlflowUI events to stderr without breaking --json stdout, and InputBox values stay redacted by default.
• When you need terminal-visible debug logs from workbook code, prefer explicit XlflowDebug.Log calls over raw Debug.Print. run and test stream XlflowDebug.Log to stderr by default and return the recent lines under top-level debug in JSON output.
• Treat src/forms/specs/*.yaml as the canonical source-controlled artifact for UserForm design. Code-behind authority depends on [userform].code_source: new projects default to sidecar, where src/forms/code/*.bas is canonical, while imported projects default to frm, where embedded .frm code remains canonical until migration. .frm / .frx are generated Designer artifacts. After xlflow form build, xlflow now re-materializes those artifacts back into src/forms/, and push blocks before Excel opens when spec filename, form.name, .frm basename, or .frm Attribute VB_Name disagree.
• Use xlflow export-image when verification depends on rendered appearance rather than saved workbook cell/style snapshots alone.
• Use xlflow edit --session for temporary workbook-state setup, event triggering, and visual tuning when the change does not belong in production VBA yet.
• xlflow run returns structured compile diagnostics by default. Use --gui-compile-errors only when a human explicitly wants raw Excel/VBE compile dialogs.
• When the macro argument is omitted, xlflow run uses project.entry from xlflow.toml.

Session Lifecycle

For normal AI-agent development tasks, use an explicit xlflow session from task start to task end:

1. Start with xlflow session start after reading xlflow.toml and resolving source-of-truth questions.
2. Matching sessions are auto-reused for list forms, inspect form, form snapshot, form build, form export-image, pull, push, macros, run, export-image, test, save, ui button add, ui button list, and ui button remove when the configured workbook path matches .xlflow/session.json; add --session when you want that reuse to be explicit.
3. Prefer xlflow push --fast --session --no-save --json while iterating, and use xlflow run --session --json or xlflow run --headless --session --json when project.entry is the intended entrypoint because structured compile diagnostics are on by default.
4. Save with xlflow save --json before any disk-based verification step such as xlflow inspect ... when the live session workbook may be newer than disk.
5. End with xlflow save --json when workbook changes must persist, then always run xlflow session stop.

Use isolated non-session commands only for one-shot CI-style verification, release checks, suspicious session state, or when the user explicitly asks not to keep Excel open.

If xlflow push --session --no-save succeeds, or xlflow run --session completes without --save or --save-as, treat the live workbook as potentially newer than the .xlsm on disk until xlflow save runs.

Standard Workflow

1. Inspect the project.

   • Read xlflow.toml.
   • Treat the configured source directories as authoritative when xlflow.toml exists and the user has not said the workbook contains newer VBA.
   • Run xlflow doctor --json when Excel, COM, VBIDE, or macro execution looks suspicious.
   • Start xlflow session start for normal AI-agent development once the source of truth is clear.
   • Run xlflow pull --session --json before editing when the workbook is the current source of truth.

2. Edit source files.

   • Prefer .bas, .cls, and .frm files under the configured source directories.
   • In folder mode, move files by directory when you want to change Rubberduck folder organization; push rewrites @Folder(...) from path in temporary import copies.
   • Do not edit binary workbooks directly unless the task is explicitly workbook-state only.

3. Import and check.

   • Prefer xlflow push --fast --session --no-save --json after source edits while the session is running.
   • Use plain xlflow push --json for CI-style verification, release checks, or when session state is suspect.
   • Run xlflow lint --json and fix reported issues before finalizing.

4. Execute behavior.

   • Prefer xlflow test --session --json.
   • Use xlflow test --filter <name> --session --json while iterating on one failing test.
   • If the macro entrypoint is unclear, run xlflow macros --session --json before choosing a target.
   • If no tests exist and project.entry is the intended target, run xlflow run --session --json.
   • Use xlflow run <MacroName> --session --json when you need a non-default entrypoint.
   • Prefer xlflow run --headless --session --json when project.entry is correct for unattended agent work that should still use the open session.
   • Use xlflow run <MacroName> --headless --session --json when you need a non-default headless entrypoint.
   • In projects scaffolded by recent xlflow versions, prefer branching on XlflowRuntime.ModeName() / IsHeadless() / IsAgent() / IsTest() instead of guessing execution context from UI state or process ancestry.
   • When a macro or test uses XlflowUI.MsgBox, XlflowUI.InputBox, or XlflowUI file dialog wrappers, keep unattended validation headless by passing repeated --msgbox <dialog-id=result>, --inputbox <dialog-id=value>, and --filedialog <kind>:<dialog-id>=<value> flags to xlflow run or xlflow test.
   • Add --ui-stream when the agent or user needs realtime confirmation of which headless dialog path was taken. Expect stderr lines such as xlflow: ui kind=msgbox id=confirm-save source=default result=yes and xlflow: ui kind=file-open id=source-files source=scripted value=C:\temp\a.txt | C:\temp\b.txt, plus final ui.events in JSON or a UI section in human output.
   • Use xlflow run <MacroName> --interactive --json only when a human can operate Excel dialogs or forms.

5. Inspect workbook results.

   • Use xlflow list forms --session --json when the workbook contains UserForms and you need the authoritative form names before planning inspect form, snapshot, or source review work.
   • Use xlflow inspect form <FormName> --runtime --session --json to read runtime state after form initialization or workbook-driven population logic; xlflow runs it against a temporary workbook copy so the source workbook state is preserved.
   • Use xlflow inspect form <FormName> --designer --session --json to inspect design-time controls and geometry without running workbook VBA.
   • Use xlflow form snapshot <FormName> --out src/forms/specs/<FormName>.yaml --session --json when you want that design-time state persisted as a reviewable JSON/YAML spec and you need concrete control types from the stricter helper path.
   • Use xlflow form export-image <FormName> --out <path> --session --json when you need a PNG of the runtime-rendered UserForm for visual review.
   • Use xlflow inspect form <FormName> --both --session --json when you need to compare designer state against runtime state in one pass.
   • Add --initializer <MethodName> to runtime or both mode when the form must be explicitly populated before inspection, such as workbook-scoped setup methods that mirror the visible UI.
   • Use xlflow edit cell --sheet <name> --cell <A1> --value <text> --events on --session --json to prepare input cells and trigger Worksheet_Change handlers during a session.
   • Use xlflow edit range --sheet <name> --range <A1:B2> --fill <#RRGGBB> --session --json or --clear contents|formats|all to reset workbook state between iterations.
   • Use xlflow edit rows --sheet <name> --rows <1:31> --height <points> --session --json and xlflow edit columns --sheet <name> --columns <A:AE> --width <chars> --session --json for visual tuning before export-image.

• Use xlflow inspect workbook --json for saved-file metadata, or xlflow inspect workbook --session --json for the live workbook state in Excel.
• Use xlflow inspect sheets --json for saved-file sheet metadata, or xlflow inspect sheets --session --json for the live workbook state in Excel.
• Use xlflow inspect range --sheet <name> --address <A1:F20> --json when the expected saved-file output range is known.
• Use xlflow inspect range --sheet <name> --address <A1:F20> --session --json when the workbook output is still only in the live session.
• Add --include-style when visual correctness depends on fill colors, borders, merged cells, row heights, or column widths.
• Use xlflow inspect used-range --sheet <name> --json when the output bounds are unknown and you need the current data rectangle.
• Use xlflow inspect cell --sheet <name> --address <A1> --json for targeted assertions on one cell.
• Use xlflow export-image --sheet <name> --range <A1:F20> --session --json when verification depends on the rendered sheet appearance, chart placement, fills, or layout.
• Prefer global --json for agent parsing. Use --format markdown only when you intentionally want a compact human/LLM-facing table.
• If the live session workbook is newer than disk, either run the matching inspect ... --session command or run xlflow save --json before relying on file-backed inspect.

6. Compare results.

   • Use xlflow diff <before> <after> --json for workbook state changes.
   • Add --vba-before <dir> --vba-after <dir> when exported source changes also need review.

7. Repeat until the command results prove the task.

   • Finish every normal AI-agent development task with xlflow save --json when workbook changes must persist, then xlflow session stop.

Project Orientation

Before editing, decide what is authoritative:

• If xlflow.toml exists and source files are present, start a session, edit the configured source tree, and use xlflow push --fast --session --json during normal development.
• If the user says the workbook has the latest VBA, or source files are missing or stale, run xlflow pull --session --json after starting the session, then edit source files.
• Do not mix direct workbook edits with source edits in the same task unless the requested change is workbook-state only and no VBA source change is needed.
• Treat xlflow inspect without --session as a disk snapshot reader. If the task depends on unsaved session changes, either inspect with --session or save first.

Before running a macro, decide the runnable entrypoint:

• Run xlflow macros --session --json when the macro name is not already proven by tests, docs, prior command output, or project.entry.
• If project.entry is the intended entrypoint, prefer plain xlflow run --session --json over repeating the macro name.
• Use a listed qualified_name from xlflow macros --session --json; do not assume names such as Main.Run.
• If the desired entrypoint is missing, add or fix the source module, run xlflow push --fast --session --json when a session is active, then rediscover macros before running.

Before designing a CLI-run macro, decide how inputs are supplied:

• Prefer xlflow run <MacroName> --arg <type:value> for user-provided paths, flags, and scalar settings.
• Use deterministic paths, environment variables, or configuration cells only when they are part of the project contract.
• Do not introduce raw MsgBox, InputBox, or file dialog calls in agent-authored VBA. Use XlflowUI.MsgBox, XlflowUI.InputBox, XlflowUI.GetOpenFilename, XlflowUI.FileDialogOpen, XlflowUI.GetSaveAsFilename, and XlflowUI.FolderPicker with stable dialog ids and plan the matching --msgbox, --inputbox, and --filedialog responses for headless or test runs.
• Avoid other UI prompts and active-window assumptions because unattended Excel automation cannot reliably answer them.
• When GUI behavior is required, keep the GUI entrypoint thin and extract the core logic into parameterized procedures that can run with xlflow run --headless --arg, or route simple dialogs and file pickers through XlflowUI.

Decision Flow

When the user asks to create or change VBA behavior:

1. Read xlflow.toml and relevant source files.
2. Start xlflow session start unless the task is a one-shot CI-style check, session state is suspect, or the user explicitly wants isolated commands.
3. If the current source of truth is unclear, run xlflow pull --session --json before editing.
4. Edit .bas, .cls, or .frm source files.
5. Run xlflow push --fast --session --no-save --json.
6. Run xlflow lint --json.
7. Run xlflow test --session --json when tests exist.
   • Use xlflow test --filter <name> --session --json for focused iteration.
   • Use xlflow test --module <ModuleName> --session --json to run one suite.
   • Use xlflow test --tag <tag> --session --json for tag-based subsets.
   • Load references/testing.md when writing new tests, adding hooks, or debugging test failures.
8. If tests do not cover the behavior, run xlflow macros --session --json, then xlflow run --headless --session --json when project.entry is correct, or xlflow run <qualified_name> --headless --session --json for non-default entrypoints. Add XlflowDebug.Log before rerunning if internal runtime state is still unclear.
9. When workbook output matters, run xlflow save --json if needed, then inspect the result with xlflow inspect workbook|sheets|range|used-range|cell --json, or use xlflow inspect form <FormName> --session --json for live UserForm state.
10. Run xlflow save --json when workbook changes must persist, then xlflow session stop.
11. Use xlflow diff <before> <after> --json when workbook state changes must be reviewed.

When the user reports a runtime failure:

1. Start xlflow session start, then reproduce with xlflow test --session --json or xlflow run <qualified_name> --session --json.
2. Inspect error.code, error.phase, VBA error metadata, run_diagnostic, and any returned debug.events before changing source.
3. Run xlflow doctor --json for setup phases such as open_workbook, prepare_vbide, or inject_harness.
4. If the failure location is still unclear, load references/debugging.md and follow the line-number plus XlflowDebug.Log workflow there.
5. Patch the smallest relevant source area, then rerun the reproduction and broader verification.

Command Usage

• Use xlflow doctor --json before blaming VBA when Excel automation fails before user code starts.
• Use xlflow session start at the beginning of normal AI-agent development tasks, and use xlflow session stop before finalizing.
• Use xlflow pull --session --json to refresh editable source from the configured workbook during a session.
• Use xlflow push --fast --session --no-save after source edits during a session.
• Use plain xlflow push when you need the safe isolated path with backup and save.
• Use xlflow backup list --json to find rollback targets after a broken push or workbook-level mistake.
• Use xlflow rollback --latest --json or xlflow rollback --backup <id> --json only after the workbook is closed or the xlflow session has been stopped; then run xlflow pull --json if source files should match the restored workbook.
• Use xlflow lint as the fast safety gate for generated VBA.
• Use xlflow test --session --json as the primary correctness signal when tests exist.
• Use xlflow test --module <ModuleName> --session --json to run only the tests in one module.
• Use xlflow test --tag <tag> --session --json to run only tests matching a tag.
• Use xlflow test --filter <TestName> --session --json for exact-name focused iteration.
• Read references/testing.md for detailed guidance on XlflowAssert, lifecycle hooks, tag conventions, and failure diagnosis.
• Use xlflow macros --session --json to discover runnable macro entrypoints before guessing a non-default run target.
• Use xlflow inspect workbook --json to confirm saved workbook metadata after save, or xlflow inspect workbook --session --json to inspect the live workbook before saving.
• Use xlflow inspect sheets --json to verify saved worksheet names, visibility, and lightweight used ranges, or xlflow inspect sheets --session --json for the live workbook.
• Use xlflow inspect range --sheet <name> --address <A1:F20> --json when the expected saved-file output rectangle is known.
• Use xlflow inspect range --sheet <name> --address <A1:F20> --session --json when the expected output rectangle is still only in the live workbook.
• Use xlflow inspect used-range --sheet <name> --json when the output rectangle is unknown or may expand.
• Use xlflow inspect cell --sheet <name> --address <A1> --json for single-cell checks or precise assertions.
• Use xlflow inspect form <FormName> --runtime|--designer|--both --session --json for UserForm inspection; prefer --designer for source/design audits, --runtime for populated runtime state from a temporary workbook copy, and --both when you need to compare them.
  • Use xlflow form snapshot <FormName> --out src/forms/specs/<FormName>.yaml --session --json when the goal is a stable artifact for review, diff, or later declarative form work rather than one-off stdout inspection.
  • Use xlflow form build src/forms/specs/<FormName>.yaml --session --json to materialize a new UserForm from a saved spec; add --overwrite when replacing an existing component intentionally.
• Use xlflow form export-image <FormName> --out <path> --session --json when the question is visual fidelity of the runtime form, including layout after initialization.
• Use xlflow inspect form <FormName> --runtime --initializer <MethodName> --session --json when the form requires an explicit initializer call before its visible state is meaningful.
• Use xlflow save --json before file-backed inspect whenever a session run or push --session --no-save may have left newer workbook state only in the live Excel instance.
• Treat xlflow inspect workbook|sheets|range|used-range|cell without --session as disk-backed workbook readers, xlflow inspect ... --session as live Excel inspectors, and xlflow inspect form as a specialized Excel COM inspection command whose runtime mode executes against a temporary workbook copy derived from the current source workbook state.
• When UserForms are involved, treat pull / push / save warnings about partial .frm fidelity and unsaved session state as actionable; do not review UserForm diffs until the live workbook has been saved and re-pulled.
• Use xlflow inspect-gui --json when a macro may require file pickers, message boxes, UserForms, or external process launches.
• If a headless macro still needs simple confirmation, scalar input, or file selection, replace raw dialogs with XlflowUI and rerun with repeated --msgbox, --inputbox, and --filedialog flags instead of suppressing the boundary.
• If headless XlflowUI behavior itself is under investigation, rerun with --ui-stream before adding extra logs. Use the streamed stderr lines for realtime progress and the final ui.events payload or UI section for post-run confirmation.
• Use xlflow edit --session only for development-time workbook mutations; if the final application behavior depends on the styling or layout change, move that behavior back into reproducible VBA before finalizing.
• Use xlflow run --headless --session for repeatable automation during normal development; if it reports gui_boundary_detected, explain that the preflight scans the configured source tree rather than the target macro call graph, then either refactor the macro or rerun with --interactive when a human is available.
• If lint reports VB007 for raw MsgBox, InputBox, or file dialog calls, replace them with XlflowUI wrappers before considering suppression. Use [lint].forbid_interactive_input = false only for genuinely human-only projects, and do not imply that this changes run --headless; headless preflight still blocks GUI boundaries.
• Plain xlflow run --session --json already compiles first, uses project.entry when the macro argument is omitted, and returns structured compile diagnostics by default.
• Use xlflow run --fast --session --gui-compile-errors only when a human explicitly accepts GUI compile dialogs and you intentionally want the direct fast path. Plain xlflow run --direct already opts out of default compile diagnostics automatically.
• Use xlflow run --gui-compile-errors --interactive --json only when a human explicitly wants raw compile dialogs instead of structured diagnostics.
• Matching workbook sessions auto-reuse on list forms, inspect form, form snapshot, form build, form export-image, pull, push, macros, run, export-image, test, save, ui button add, ui button list, and ui button remove; use explicit --session when you want that reuse to be deliberate and visible in the command line.
• Use xlflow attach --active --json before human-assisted sessions to confirm that the open Excel workbook matches xlflow.toml.
• Use xlflow run --session --json when tests are absent or the macro mutates workbook state. If more internal state is needed, add XlflowDebug.Log and rerun.
• Use xlflow diff to summarize workbook and optional exported VBA differences.

VBA Coding Rules

• Always use Option Explicit.
• Avoid Select, Activate, ActiveSheet, and unqualified Range.
• Prefer explicit workbook and worksheet references.
• Use Long instead of Integer.
• Keep procedures small and move business logic into testable standard modules.
• Restore Application state in cleanup paths.
• Use On Error GoTo ErrHandler; avoid broad On Error Resume Next.
• Do not pass object or array values to AssertEquals; compare scalar properties such as Range.Value2.
• Do not introduce raw MsgBox or InputBox outside XlflowUI.bas or a deliberate interactive-only adapter. Use XlflowUI.MsgBox / XlflowUI.InputBox with stable dialog ids, and load references/xlflow-ui.md when designing dialog flows.
• Avoid other UI prompts such as Application.GetOpenFilename, Application.GetSaveAsFilename, Application.FileDialog, and UserForm.Show in macros that must run headlessly. Prefer run --arg, environment variables, configuration cells, deterministic paths, or an interactive-only adapter.
• Structure GUI-dependent macros with a human-facing entrypoint and a headless core:

Public Sub ImportData()
    Dim path As String
    path = PickImportFilePath()
    If path = "" Then Exit Sub
    ImportDataFromPath path
End Sub

Public Sub ImportDataFromPath(ByVal path As String)
    ' Core logic here
End Sub

Progress Rules

Use normal Excel COM-backed commands with or without --json; xlflow reports progress on stderr. Interactive terminals show a spinner, non-interactive or --json runs fall back to a single stderr progress line, and commands that stream UI/debug events may suppress separate progress output so those stderr records stay parseable.

After starting a workbook-dependent command, wait for the process to exit before beginning the next step. Do not synchronize on transient stderr frames or assume silence means the command is stalled.

Debug Rules

Use XlflowDebug.Log for VBA-internal execution-state logging and xlflow run --session --json or xlflow test --session --json for machine-readable execution results.

When debugging, add XlflowDebug.Log calls at procedure entry, important branches, row or column counts, external paths, before and after destructive operations, and error handlers.

Keep high-level progress debug logs if they help future diagnosis. Remove noisy temporary logs before finalizing.

XlflowDebug.Log "start GenerateReport"
XlflowDebug.Log "lastRow", lastRow
XlflowDebug.Log "finished GenerateReport"

Windows PowerShell Checklist

When workbook code launches an external PowerShell process, separate xlflow's bridge host from the workbook-side host:

1. Check top-level bridge.host to see which PowerShell xlflow itself used.
2. Inspect the VBA command string or log the resolved executable from workbook code; it may be powershell.exe even when xlflow reports pwsh.exe, or the reverse.
3. If the issue looks like encoding or environment drift, standardize on one host before changing xlflow or VBA logic.

Excel Process Management

• Use xlflow process list to list all local Excel processes. The output includes PID and whether each process has open workbooks.
• Use xlflow process cleanup <pid> to terminate a single Excel process by PID. The command tries graceful shutdown first and falls back to force-stop only if the process persists.
• Use xlflow process cleanup --auto to terminate only Excel processes that have no open workbooks. This is safe for cleaning up zombie Excel instances.
• Use xlflow process cleanup --all to force-terminate ALL Excel processes. WARNING: cleanup --all is a destructive operation that WILL terminate every Excel process on the local machine, including any with unsaved workbooks. This command always prompts for confirmation unless --yes is passed.

Failure Handling

If xlflow test fails, read the failing test name, module, error.code, VBA error number, description, and line. Distinct error.code values include test_failed, before_all_failed, after_all_failed, before_each_failed, after_each_failed, and test_inconclusive. Hook failures (before_all_failed, after_all_failed, before_each_failed, after_each_failed) indicate setup/cleanup problems rather than assertion failures in the test body. Load references/testing.md for a full failure-code reference. Patch the smallest relevant area, rerun the focused test with --filter first, then run the full test suite.

If xlflow run fails, inspect error.code, error.phase, and any top-level run_diagnostic. macro_not_found means the entrypoint is missing or invalid; run xlflow macros --session --json and correct the target before changing user code. Setup phases such as open_workbook, prepare_vbide, and inject_harness usually indicate environment, configuration, or VBIDE access problems. invoke_macro points at the target macro or code it calls. Plain run already includes compile-first diagnostics by default; do not switch to --gui-compile-errors unless a human explicitly wants GUI dialogs.

If xlflow run --headless --session --json fails with gui_boundary_detected, read gui_boundaries and do not retry the same command blindly. If the boundary is raw MsgBox or InputBox, replace it with XlflowUI and rerun with --msgbox / --inputbox. Otherwise refactor the GUI boundary behind a parameterized core procedure, or switch to xlflow run --interactive --json only when a human is ready to operate Excel. If macro_timeout is returned, suspect an unresolved dialog, file picker, UserForm, or long-running loop.

If xlflow run --diagnostic --session --json fails with vba_compile_failed, inspect run_diagnostic.kind, run_diagnostic.message, run_diagnostic.location, and run_diagnostic.nearby_code before changing source. Treat dialog text as localized opaque text and fix the selected source location when available.

If xlflow run --session --json fails, read debug.events, identify the last successful log line, add targeted XlflowDebug.Log calls around the suspected block, and rerun. If the failed run has no useful debug events, add an entry log at the macro start or verify the macro target with xlflow macros --session --json. For normal run debugging, prefer references/debugging.md and XlflowDebug.Log.

If a headless XlflowUI run behaves differently than expected, reproduce with the same --msgbox / --inputbox values plus --ui-stream. Compare the streamed stderr lines against the final ui.events payload to confirm which dialog ids resolved from scripted responses versus workbook defaults.

If xlflow lint fails, fix lint findings directly in source files before rerunning push, run, or test.

Run xlflow analyze --json or xlflow check --json before changing object-heavy VBA. Analyzer findings such as VBA101, VBA102, and VBA103 usually mean a missing Set assignment.

If xlflow inspect does not show the workbook changes you expected, first decide whether disk is stale. A prior xlflow push --session --no-save or xlflow run --session can leave the live Excel workbook newer than the saved .xlsm; run xlflow save --json and inspect again before assuming the macro logic failed.

If a UserForm inspection looks wrong, first decide whether you need design-time state or runtime state. Use xlflow inspect form <FormName> --designer for control layout and static properties, and --runtime when labels, combo contents, or text boxes are populated by code. If runtime values are blank but the visible UI should be initialized, rerun with --initializer <MethodName> before changing source.

If the structure looks right but the visible layout is still uncertain, use xlflow form export-image <FormName> --out <path> --session --json to capture the runtime-rendered form from a temporary workbook copy.

If xlflow inspect used-range is truncated, use the reported returned_range and warnings to choose a narrower follow-up xlflow inspect range query instead of blindly increasing prompt size.

If workbook correctness is visual and inspect still leaves ambiguity, use xlflow export-image --sheet <name> --range <A1:F20> --session --json and inspect the generated PNG artifact under .xlflow/artifacts/images/.

Final Response

Report:

• changed modules or files
• commands executed
• lint, test, macro, and diff results
• remaining risks or unverified conditions