Profile My skills Saved Collections Edit profile Submit a skill

← all publishers

shain1912

@shain1912 source repo

9 published skills

  1. ▌
    Mqtt Classroom · shain1912 bundle
    Connect to the classroom Mosquitto broker to control XIAO ESP32C6 boards and read their A0 sensor values over MQTT. Use when the user wants to list boards, turn a board's LED on/off, watch sensor readings, or debug why they cannot reach the broker.
    0
    installs
  2. ▌
    Xiao Esp32s3 · shain1912 bundle
    Operate a Seeed XIAO ESP32S3 board with arduino-cli on Windows: install the core, compile, upload, read serial output, and run verified examples (blink, serial, touch, ADC, PWM, WiFi scan/AP, BLE, deep sleep). Use this skill WHENEVER the task involves an ESP32S3 / XIAO board, arduino-cli, flashing a sketch, reading the serial monitor, COM ports, or any embedded/Arduino work — even for a "simple" LED change. It contains verified commands and known pitfalls (DTR reset, deep-sleep USB drop, PSRAM flag) that prevent wasted debugging time.
    0
    installs
  3. ▌
    Xiao Webcam Ap · shain1912 bundle
    Build and flash the XIAO ESP32S3 Sense camera web apps in STANDALONE AP (hotspot) mode: a Teachable-Machine-style dataset collector page and a live inference viewer page served by the board itself at http://192.168.4.1. Use this skill whenever the user wants the camera web app WITHOUT a router — classroom/education deployments, demos with no WiFi, per-student boards, or says "AP 모드", "핫스팟", "공유기 없이". For router (STA) mode use the xiao-webcam-sta skill instead.
    0
    installs
  4. ▌
    Xiao Webcam Sta · shain1912 bundle
    Build and flash the XIAO ESP32S3 Sense camera web apps in STA (router) mode: a Teachable-Machine-style dataset collector page and a live inference viewer page, reachable at http://<name>.local while every device KEEPS its internet connection. Use this skill whenever the user wants the camera web app on their normal WiFi network — home/office development, "인터넷 안 끊기게", "공유기로", "mDNS", or says "STA 모드". For router-less classroom hotspot deployments use the xiao-webcam-ap skill instead.
    0
    installs
  5. ▌
    Xiao I2c Sensors · shain1912 bundle
    Bring up I2C sensors on a XIAO ESP32S3 and stream their values to serial: BH1750 ambient light, BME280 temperature/pressure/humidity, and BNO055 9-DOF fused orientation, individually as unit tests or all three together on one bus. Use this skill WHENEVER the task involves I2C sensors on an ESP32S3 — wiring one up, "센서 값 읽어줘", a sensor that answers the scan but reads zeros, unit-testing a module before trusting it, deciding whether a 0x76 part is a BME280 or a BMP280, or a BNO055 whose orientation stays at 0. It carries hardware-verified sketches and the address/clock traps that make a healthy-looking sensor return nothing.
    0
    installs
  6. ▌
    Xiao Imu Mpu 6050 · shain1912 bundle
    Motion sensing on a XIAO ESP32S3 with an MPU-6050 / MPU-6500 6-axis IMU: accelerometer and gyroscope over I2C, startup calibration, and a moving/still decision driven to the onboard LED. Use this skill WHENEVER the task involves an MPU-60x0 module on an ESP32S3 — "움직임 감지해줘", wiring one up, an Adafruit_MPU6050 sketch whose begin() returns "MPU6050 not found" even though the scan shows 0x68, a gyro that drifts hundreds of degrees per minute, an accelerometer whose magnitude sits well off 9.8 m/s² at rest, or deciding whether a module labelled MPU-6050 is actually an MPU-6500. Carries a hardware-verified library-free driver and the identity trap that makes a perfectly healthy module look broken.
    0
    installs
  7. ▌
    Xiao Serial Monitor · shain1912 bundle
    Serial monitoring for a XIAO ESP32S3 (or any Arduino board) on Windows, in both modes that matter: a bounded read the agent can run to debug its own changes, and a persistent terminal monitor handed to the user with clear instructions for checking output later. Auto-detects the COM port by USB vendor ID, survives the port dropping on every reset and re-upload, and adds one-word `mon` / `flash` shortcuts to the PowerShell profile. Use this skill WHENEVER serial output is involved: reading what a board is printing, asking to "open the serial monitor", wanting it available "every time" or as a shortcut, a monitor that keeps disconnecting, needing Ctrl+C before every upload, the wrong COM port being picked, or whenever you are about to tell the user how to watch the board themselves.
    0
    installs
  8. ▌
    Xiao Edgeimpulse Train · shain1912
    Train and deploy a TinyML model for the XIAO ESP32S3 (Sense) using the Edge Impulse REST API only — no edge-impulse-cli needed (its serialport dep fails to build on modern Node/Windows). Covers: dataset upload, impulse creation (audio MFCC / vision transfer-learning), training jobs, downloading the Arduino library, and the on-device fixes required to actually run it on the ESP32-S3. Use this skill whenever the user wants to train/retrain a model ("재훈련", "edge impulse", "TinyML 훈련", "모델 배포"), upload a dataset to Edge Impulse, or gets EI Arduino-library build/runtime errors (mel filterbank, objs.a, tensor arena, EI_MAX_OVERFLOW_BUFFER_COUNT).
    0
    installs
  9. ▌
    Xiao Esp32s3 Mqtt Dashboard · shain1912 bundle
    Build a multi-board dashboard for XIAO ESP32S3: each board joins WiFi (STA mode), publishes its touch sensor value over MQTT, and accepts LED on/off commands, while a browser dashboard shows every board live and lets you toggle each LED. Use this skill whenever the user wants several ESP32S3 boards reporting to one web page, an MQTT-based sensor dashboard, "여러 esp32s3 대시보드", "MQTT로 여러 보드 연결", or mentions Mosquitto/Eclipse MQTT with an ESP32S3. For a single board with no broker, use the `xiao-esp32s3` skill's own SoftAP + web server example instead.
    0
    installs